• Types of injectors : packed column injection, capillary tube injection, six-way valve 

gas injection, automatic sampler ; 

• Number of detectors : 3 (maximum); FID , TCD , ECD , FPD and NPD optional ; 

• Start sample injection : manual and automatic are optional; 

• Communication interface : Ethernet: IEEE802.3 ; 

B.  Detector Specifications

1.  Hydrogen flame ionization detector (FID) 

• Linear range : ≥106

• Detection limit : ≤5×10-12 g/s(hexadecane/isooctane) 

• Baseline noise : ≤ 0.05 P A 

• Baseline drift : ≤1x10-13A/30min 

2.  Hydrogen Generator:

1. Mains supply voltage : 220v 50Hz

2. Maximum power : 150W; 180W

3. Ambient temperature : 0-40℃, relative humidity <85%.

4. Environmental conditions : without much dust and corrosive gas.

5. Gas purity : 99.999% (relative oxygen content)

6. Output flow : Type 300 0-300 m1/min; Type 500 0-500 m1/min

7. Output pressure : 0.4Mpa (if special pressure is required, notification should be 

given tofactory before leaving the factory to determine other things)

3.  Thermal Conductivity Detector (TCD) 

• Baseline noise : ≤ 20 μV 

• Linear range : ≥104

• Baseline drift : ≤ 3 0μ V /30min 

• Sensitivity : S≥ 10000 mV•ml/mg ( benzene/toluene ) ( With magnification of 1, 2, 

3, 4 times optional )